Top Tips

Earth Fault Loop Impedance Test & Prospective Fault Current Test

Tutor Andy talks you through earth fault loop impedance and prospective fault current testing....

How Do You Isolate a Consumer Unit and Socket Outlet

How do you safely isolate a single-phase distribution board and socket outlet? Andy demonstrates...

How to Attach Conduit Between Two Accessory Points

Steve and Andy demonstrate - in this video, they show some of the equipment, tools, and personal...

How to Carry Out a Class 1 PAT Test

Showing you how to carry out a simple class 1 PAT test including filling in...

How to Extend a Short Cable

Tutor Andy explains how to extend a short cable in this electrical video.

How To Install an EV Charging Post

A STEP BY STEP guide by a qualified EV Charging Point Installer.

How to Make a 90 Degree Bend in Conduit

Tutors Andy & Steve demonstrate how to put a 90-degree bend in some metal conduit to go between...

How to Remove a Stripped Screw Using a Elastic Band

Our instructor Andy demonstrates in this live demonstration.

How To Strip a Steel Wire Armoured (SWA) Cable

Tutor Jay demonstrates how to size up and fit a gland to an SWA (steel wire armoured)...

How to Wire a Double Socket

Our instructor Andy explains how to wire a UK double socket.

How to Terminate a CAT 6 Data Cable

Electrical Tutor Jay demonstrates how to terminate an RJ45 plug onto a CAT 6 data cable in this...

How Unvented Hot Water Works

Showing you how faults develop in an unvented hot water system.

Making a Running Coupling in Metal Conduit

Tutors Andy & Steve demonstrate how to install metal conduit between two fixed points using...

Ring Final Circuit Testing Revision

Need to brush up on ring final circuit testing? This video is available to Trade Skills 4U...

Safe Isolation Procedures Tutorial

James Deans from Trade Skills 4U talks you through safe isolation procedures. This video is very...

Solar Thermal Tutorial