What experience do I need?

BESTSELLER
Existing Electrician
2 days

BPEC Electrical Energy (Battery) Storage Course

This course aims to provide practising electricians with the skills and knowledge required to install small-scale electrical energy (battery) storage systems.

The course has been structured to meet the requirements of dedicated electrical energy storage systems (EESS) in accordance with the IET Code of Practice for Electrical Energy Storage Systems and the MCS Battery Standards MIS 3012.

We strongly recommend candidates undertake training in Solar PV before attending this course.

Please note: Bootcamp Funding Available If you cant see the dates you want please call 01293 529777 and speak to a course advisor

QUALIFICATION

BPEC Introduction to Electrical Energy Storage Systems (EESS)

ENTRY REQUIREMENTS

This course is intended for qualified electricians. Please read the entry requirements carefully before booking this course.

DELIVERY METHODS

Short pre-learning (eLearning) module
2 Days In Centre

PRICE

£408.00 (£480.00 inc VAT)

GET IN TOUCH BOOK NOW

Please note: Bootcamp Funding Available If you cant see the dates you want please call 01293 529777 and speak to a course advisor

QUALIFICATION

BPEC Introduction to Electrical Energy Storage Systems (EESS)

ENTRY REQUIREMENTS

This course is intended for qualified electricians. Please read the entry requirements carefully before booking this course.

DELIVERY METHODS

Short pre-learning (eLearning) module
2 Days In Centre

PRICE

£408.00 (£480.00 inc VAT)

GET IN TOUCH BOOK NOW

Explainer Video

BPEC EESS Battery Storage Course

BPEC Battery Storage Explained

This 2 day Electrical Energy Storage Systems (EESS) Course is delivered in centre by experienced instructors. You will gain the BPEC qualification and we recommend doing a Solar PV Course first. Find out more below.

This course can be funded with Skills Bootcamps Funding

If you are self-employed or an employer looking to upskill your staff in electrical installation or green skills we have funding opportunities that can vastly reduce the cost of this course and, in some cases, fully fund it.

Fund this Course

Course Overview

What Will I Learn On This Course?

This 2 day course covers design, installation and maintenance of electrical energy (battery) storage systems for domestic premises. We strongly recommend you complete the BPEC Solar PV course before attending this course. This qualification is valid for 5 years and must be refreshed.

Course Entry Requirements

Please read the following entry requirements carefully.

You will need to bring with you evidence of your qualifications when you attend your training centre or you may not be able to continue your training.

If booking the course via telephone

To be eligible for this course you must meet one of the following requirements:

N/SVQ Installing Electrical Systems and Equipment Buildings, Structures and the Environment or Electrotechnical Technology and BS 7671: 2018 Requirements for Electrical Installations (18th Edition) qualification.

Equivalent historical qualifications

Current ECS Gold Card, JIB Electrician or Approved Electrician Card

Stand-alone technical certificates/vocationally related qualifications (VRQ) (non-competency based) are NOT acceptable.

If you believe you meet the above criteria, please contact our Sales Advisors on 0800 856 4448 who can verify your qualifications.

If booking the course online

If you wish to book this course online you must have one of the following qualifications or ECS cards. If you do not have any of the following but believe you meet the requirements for this course, contact our course advisors to check your eligibility.

Current ECS Gold Card for:

Installation Electrician
Maintenance Electrician
Domestic Electrician

Any of the following qualifications plus 18th Edition Wiring Regulations qualification:

C&G 5393 Electrotechnical in Dwellings
C&G 5357 Level 3 Electrotechnical (installation or maintenance
C&G 2357 Level 3 NVQ Diploma in Installing Electrotechnical Systems and Equipment (buildings, structures and the environment)
C&G 2346 Level 3 Electrotechnical Experienced Worker Qualification
C&G 2347 Level 3 Electrotechnical in Dwellings Experienced Worker Qualification

If you do not hold any of the above qualifications or a current ECS Gold Card, please contact us on 0800 856 4448 to confirm you meet the criteria for this course.

What will I learn?

Snapshot

This course aims to provide practising electricians with the skills and knowledge required to install small-scale electrical energy (battery) storage systems.

We strongly recommend candidates undertake training in Solar PV before attending this course.

Course Modules

Introduction to Electrical Energy Storage Systems (EESS) (battery storage)
Legislation, Standards, and Industry guidance
Preparation for Design and Installation
Design and Installation
Initial Verification Methods
Handover and DNO Notification

Course Books

What books do you require?

Upon arrival at the Centre, we will provide you with a BPEC Learning Manual. This is included in the cost of the course.

You may wish to purchase the following Code of Practice. This is not mandatory but you could find it helpful to your studies:

IET Code of Practice for Electrical Energy Storage Systems (3rd Edition) – ISBN-13: 978-1-83953-041-8.

Important Information

You must bring the following items on the first day of your course

Passport size photographs (x2)
Basic stationery (Pen, pencil, ruler)
A calculator
Evidence of qualifications held or current ECS Gold Card (see entry requirements)

Course Entry Requirements

Please read the following entry requirements carefully.

You will need to bring with you evidence of your qualifications when you attend your training centre or you may not be able to continue your training.

If booking the course via telephone

To be eligible for this course you must meet one of the following requirements:

Equivalent historical qualifications

Current ECS Gold Card, JIB Electrician or Approved Electrician Card

Stand-alone technical certificates/vocationally related qualifications (VRQ) (non-competency based) are NOT acceptable.

If you believe you meet the above criteria, please contact our Sales Advisors on 0800 856 4448 who can verify your qualifications.

If booking the course online

Current ECS Gold Card for:

Installation Electrician
Maintenance Electrician
Domestic Electrician

Any of the following qualifications plus 18th Edition Wiring Regulations qualification:

C&G 5393 Electrotechnical in Dwellings
C&G 5357 Level 3 Electrotechnical (installation or maintenance
C&G 2357 Level 3 NVQ Diploma in Installing Electrotechnical Systems and Equipment (buildings, structures and the environment)
C&G 2346 Level 3 Electrotechnical Experienced Worker Qualification
C&G 2347 Level 3 Electrotechnical in Dwellings Experienced Worker Qualification

If you do not hold any of the above qualifications or a current ECS Gold Card, please contact us on 0800 856 4448 to confirm you meet the criteria for this course.

What will I learn?

Snapshot

This course aims to provide practising electricians with the skills and knowledge required to install small-scale electrical energy (battery) storage systems.

We strongly recommend candidates undertake training in Solar PV before attending this course.

Course Modules

Introduction to Electrical Energy Storage Systems (EESS) (battery storage)
Legislation, Standards, and Industry guidance
Preparation for Design and Installation
Design and Installation
Initial Verification Methods
Handover and DNO Notification

Course Books

What books do you require?

Upon arrival at the Centre, we will provide you with a BPEC Learning Manual. This is included in the cost of the course.

You may wish to purchase the following Code of Practice. This is not mandatory but you could find it helpful to your studies:

IET Code of Practice for Electrical Energy Storage Systems (3rd Edition) – ISBN-13: 978-1-83953-041-8.

Important Information

You must bring the following items on the first day of your course

Passport size photographs (x2)
Basic stationery (Pen, pencil, ruler)
A calculator
Evidence of qualifications held or current ECS Gold Card (see entry requirements)

BPEC Battery Storage Course

Exams and Assessments

This course contains multiple-choice assessments and practical assessments including:

1 x Multi-choice Question Paper
Practical Assessment

Please note that you must bring photographic ID such as a passport or driving license with you in order to sit the assessments on this course.

BPEC EESS BATTERY STORAGE COURSE

Course Gallery

Course Review

Testimonial: Will

Here is an opportunity to hear what one of our students Will thinks of the BPEC EESS Battery Storage course. Will has previously trained at our electrical training centre located in Warrington and chose to return and study with us again. He describes the facilities, tutors, and courses and peers.

Check out more testimonials and case studies here.

0% PAYMENT PLANS

Pay as You Train

We understand that some of the courses can be difficult to pay all at once, therefore, on our longer courses you can Pay As You Train, which means you pay week by week interest-free.

Pay As You Train is only available on our longer courses. Typically we will agree on a payment plan with you, where you will pay a deposit, and then pay a set amount 21 days before each class start date.

FIND OUT MORE